Carboneras

 

 

CARBONERA N.1
Trug Carbonera N. 1
Alto 22 – Boca 41 cm
CARBONERA N. 2
Trug Carbonera N. 2
Alto 26 – Boca 45 cm

 

MODELO Cap./Lt. N/ Ref. EAN-CODE Peso/Kg.
Weight/ Kg.
U. Embalaje
Packing U.
U. palet
U. palet
CARBONERA N.1
Trug Carbonera N. 1
24 1020301 84 24775 203015 3,45 10 100
CARBONERA N.2
Trug Carbonera N. 2
30 1020302 84 24775 203022 3,75 10 100

 

CAPAZO 18 lt.
Rubber Trug
Alto 20 – Boca 40 cm

 

MODELO Cap./Lt. N/ Ref. EAN-CODE Peso/Kg.
Weight/ Kg.
U. Embalaje
Packing U.
U. palet
U. palet
CAPAZO 18
Rubber Trug
18 1020401 84 24775 204012 2,35 10 200

 

COMPORTAMIENTO A BAJAS TEMPERATURAS

Son conocidas las ventajas del material de Goma de Neumático con respecto al plástico.
Su capacidad de absorción de impactos, cortes y estiramientos es muy superior.
Ahora también conocemos que estas ventajas se acrecientan según desciende la temperatura.
En efecto, mientras que el plástico se torna quebradizo y frágil en el entorno de los 0º centígrados, pruebas de laboratorio demuestran que la Goma de Neumático no pierde sus propiedades ni siquiera al acercarse a los -60 ºC .De hecho, algunos valores como el de Tension de Rotura, se acrecienta a temperaturas bajo cero:
Resultados de test de rotura para Goma de Neumático modelo nº 106:
 

  +20º C -30º C
Tension de Rotura: 64 Kg/cm2  120 Kg/cm2
Alargamiento de Rotura: 42 %  20 %

 

 

Al incrementarse la Tensión de Rotura a -30ºC, y quedando el Alargamiento de Rotura ligeramente por encima del 20%, el resultado es una capacidad de absorción de impactos de la Goma de Neumático muy satisfactoria a esta temperatura extrema, permitiendo su uso con toda garantía por el profesional de la construcción o el montaje en las más duras condiciones invernales.

 

PERFORMANCE AT LOW TEMPERATURES

The mechanical advantages of the Rubber material over plastic is well known on temperatures above cero degrees centigrades. It is also noted how plastic materials turn fragile and easily break below 0 ºC . It has been recently tested that our rubber material for trugs does not start to loose its properties down to extreme cold temperatures such as -60 ºC.
Not only that, but some physical properties such as Tensile Strength even improve at temperatures below cero degrees :
Test Results for our Rubber Material – container 80 lt.:

 

  +20º C -30º C
Tensile Strength: 64 Kg/cm2  120 Kg/cm2
Elongation at Break: 42 %  20 %

 

 

As the tensile strength does increase down to -30 ºC, and the elongation at break keeps slightly over 20 % , it turns out that our Rubber Material´s impact absorbing capacity is extremely satisfactory at a temperature of -30 ºC, and thus allows its use on any tough work environment under these conditions. It turns out our advantage over plastic materials actually increases under winter’s colder temperatures.